Showing 41–60 of 63 results

  • uPVC Fittings - Pipe Sleeve

    uPVC Fittings – Pipe Sleeve

    0 out of 5
    Price range: RM2.93 through RM36

    A hollow, cylindrical insert placed in the form of a concrete wall at the position where a pipe is to penetrate in order to prevent the flow of concrete into the opening.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - PT Socket

    uPVC Fittings – PT Socket

    0 out of 5
    Price range: RM1.62 through RM2.16

     This socket allows for a secure and reliable connection between pipes, facilitating the extension or modification of piping systems in plumbing and irrigation applications.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Reducing Bend(4"x3")

    uPVC Fittings – Reducing Bend(4″x3″)

    0 out of 5
    RM11.25

    Reducing 90° Bend are a pipe fitting used to connect two pieces of pipe of the same diameter to form an angle of 90 degrees, with one side of the elbow being smaller than the other.

    Add to basketDone
  • uPVC Fittings - Reducing Bush

    uPVC Fittings – Reducing Bush

    0 out of 5
    Price range: RM1.04 through RM9.36

    Reducing Bushes are used to reduce the diameter of one end of a plain pipe fitting and then connect this to a smaller threaded fitting.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Reducing Socket

    uPVC Fittings – Reducing Socket

    0 out of 5
    Price range: RM4.50 through RM130.50

    The reducing socket can make parallel connections of two pipes with different diameters.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Reducing Tee

    uPVC Fittings – Reducing Tee

    0 out of 5
    Price range: RM13.05 through RM171

    The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Reducing Tee with I/O

    uPVC Fittings – Reducing Tee with I/O

    0 out of 5
    Price range: RM17.10 through RM150.75

    The reducing tee is can connect with three pipe joints of the different nominal diameter to make the pipe can be turned 90 or 180 degrees.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - S Trap (110mm)

    uPVC Fittings – S Trap (110mm)

    0 out of 5
    RM41.40

    S-traps are a type of plumbing trap that blocks sewer gases in sinks and other plumbing fixtures. The S-shaped pipe configuration traps wastewater before it drains to the sewer line, creating a water seal that prevents gases from flowing up through the drain.

    Add to basketDone
  • uPVC Fittings - S Trap with I/O (110mm)

    uPVC Fittings – S Trap with I/O (110mm)

    0 out of 5
    RM41.40

    S-traps are a type of plumbing trap that blocks sewer gases in sinks and other plumbing fixtures. The S-shaped pipe configuration traps wastewater before it drains to the sewer line, creating a water seal that prevents gases from flowing up through the drain.

    Add to basketDone
  • uPVC Fittings - Straight Coupling

    uPVC Fittings – Straight Coupling

    0 out of 5
    Price range: RM0.63 through RM90

    Straight couplings for PVC pipes are essential fittings that connect two sections of pipe, ensuring a secure and leakproof joint.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - U Trap Body(110mm)

    uPVC Fittings – U Trap Body(110mm)

    0 out of 5
    RM20.70

    A uPVC U-Trap body is a durable, corrosion-resistant plumbing fitting, designed to form a U-shaped bend in waste and soil drainage systems, ensuring reliable water seal to prevent sewer gas backflow.

    Add to basketDone
  • uPVC Fittings - Underground 45° Bend

    uPVC Fittings – Underground 45° Bend

    0 out of 5
    Price range: RM9 through RM69.75

    45° Bend is for an “offset” change in direction of the piping at 45°

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Underground 92° Bend

    uPVC Fittings – Underground 92° Bend

    0 out of 5
    Price range: RM10.80 through RM78.75

    92° Bend is for an “offset” change in direction of the piping at 92°

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Underground Single Branch

    uPVC Fittings – Underground Single Branch

    0 out of 5
    Price range: RM17.55 through RM119.25

    This tee has a curved center section. In drainage systems, it is primarily used to connect horizontal drains (including fixture trap arms) to vertical drains. The center connection is generally to the pipe leading to a trap (the trap arm). It must not connect a vertical drain to a horizontal drain, because of the likelihood…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Underground Socket

    uPVC Fittings – Underground Socket

    0 out of 5
    Price range: RM6.30 through RM33.30

    PVC sockets are used to connect two pieces of pressure pipe together.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Underground U Trap Body(110mm)

    uPVC Fittings – Underground U Trap Body(110mm)

    0 out of 5
    RM22.95

    The U trap body forms a U-shaped bend in underground sewer or drainage piping systems. By retaining a water seal, it blocks sewer gases from flowing back into buildings

    Add to basketDone
  • uPVC Fittings - Vent Cowl

    uPVC Fittings – Vent Cowl

    0 out of 5
    Price range: RM1.22 through RM13.50

    Used to allow foul gases generated in the system to escape. It is used as a cap on top of the vertical line.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Y Tee

    uPVC Fittings – Y Tee

    0 out of 5
    Price range: RM4.41 through RM155.25

    Wye tee allows one pipe to be joined to another at a 45° angle. This type of tee reduces friction and turbulence that could hamper the flow. Wye tee is also known as a lateral.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings - Y TEE with I/O

    uPVC Fittings – Y TEE with I/O

    0 out of 5
    Price range: RM5.40 through RM24.57

    Wye tee allows one pipe to be joined to another at a 45° angle. This type of tee reduces friction and turbulence that could hamper the flow. Wye tee is also known as a lateral.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • uPVC Fittings – 92° Sweep Bend with I/O

    uPVC Fittings – 92° Sweep Bend with I/O

    0 out of 5
    Price range: RM2.93 through RM126

    92° Bend is for an “offset” change in direction of the piping at 92°.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

End of content

End of content